Standard Setup

Setting up your hardware

Learn everything about how to plug in the hardware and get started.

Tutorial Covers:

  • Hardware Setup
  • WiFi Setup

Connect the hardware

Power

  • Plug in the USB cable into the power adapter and left side of the oalla device.
  • Plug the power adapter into the wall.

HDMI

  • Plug in the HDMI cable into the right side of the oalla device and into the HDMI port of your TV.

Mouse

Plug in a usb mouse (not included) into the lower port on the left side of the oalla device.

TV Setup

Select TV Input

Switch your TV to the correct HDMI input. Use the Input or Source button on your TV's remote control to change the input until you see the oalla home screen.

Note: your remote and TV will probably look different from the image to the right.

Connect device to WiFi network

WiFi

On the panel on the far left, click the WiFi bar. Then, in the panel on the right, click on your WiFi network. Make sure you have your network name and password handy and fill in the information to connect to the network.

Finalize Setup

  • The device should now be connected to the network.
  • Retart the device by unplugging the power cable.
  • Unplug the mouse.
  • When the device turns on, your should see a blank screen.

Next

Dashboard

Now that the hardware is setup, use the dashboard to configure what is shown on screen. Click the button on the right to learn how.